INPUT |
Connectors: |
1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip |
Type: |
Electronically balanced/unbalanced, RF filtered |
Impedance: |
Balanced 40k ohm, unbalanced 20k ohm |
Max Input Level: |
>+21dBu balanced or unbalanced |
CMRR: |
>40dB, typically >55dB at 1kHz |
OUTPUTS |
Connectors: |
1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip |
Type: |
Impedance-balanaced/unbalanced, RF filtered |
Impedance: |
Balanced 200 ohm, unbalanced 100 ohm |
Max Output Level: |
>+21dBu balanced/unbalanced into 2k or greater >+20dBm balanced/unbalanced (into 600)
|
SYSTEM PERFORMANCE |
Bandwidth: |
20Hz to 20kHz, +/-0.5dB |
Frequency Response: |
<10Hz to >50kHz, +0.5/-3dB |
Noise Reduction In: |
(+/-6 and +/-12dB range): |
Signal-to-Noise: |
>102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth |
Dynamic Range: |
>120dB, unweighted |
Noise Reduction Out: |
(+/-6dB range): |
Signal-to-Noise: |
>94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth |
Dynamic Range: |
>112dB, unweighted |
Noise Reduction Out: |
(+/-12dB range): |
Signal-to-Noise: |
>90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth |
Dynamic Range: |
>108dB, unweighted |
THD + Noise: |
<0.04%, 0.02% typical at +4dBu, 1kHz |
Interchannel Crosstalk: |
<-80dB, 20Hz to 20kHz |
Noise Reduction: |
Up to 20dB of dynamic broadband noise reduction |
FUNCTION SWITCHES |
Type III? NR: |
Activates dbx? Type III? Noise Reduction |
EQ Bypass: |
Bypasses the Graphic Equalizer section in the signal path |
Low Cut (recessed): |
Activates the 40Hz 18dB/octave Bessel high-pass filter |
Range (recessed): |
Selects either +/- 6dB or +/-15dB slider boost/cut range |
INDICATORS |
Output Level Meter: |
4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu |
Gain Reduction Meter: |
4-LED bar graph (all Red) at 0, 3, 6, and 10dB |
Type III? NR Active: |
Yellow LED |
EQ Bypass: |
Red LED |
Clip: |
Red LED |
Low Cut Active: |
Red LED |
+/-6dB range: |
Yellow LED |
+/-12dB range: |
Red LED |
POWER SUPPLY |
Operating Voltage: |
100VAC 50/60Hz, 120VAC 60Hz 230VAC 50/60Hz |
Power consumption: |
23W |
Main Connection: |
IEC receptacle |
PHYSICAL |
Dimensions: |
5.25" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm) |
Note: Specifications subject to change without notice. |