INPUT |
Connectors: |
1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip |
Type: |
Electronically balanced/unbalanced, RF filtered |
Impedance: |
Balanced 40 kOhm, unbalanced 20 kOhm |
Max Input Level: |
>+21dBu balanced or unbalanced |
CMRR: |
>40dB, typically >55dB at 1kHz |
OUTPUTS |
Connectors: |
1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip |
Type: |
Impedance-balanaced/unbalanced, RF filtered |
Impedance: |
Balanced 200 ohm, unbalanced 100 ohm |
Max Output Level: |
>+21dBu balanced/unbalanced into 2 kOhm or greater >+18dBm balanced/unbalanced (into 600 ohm) |
SYSTEM PERFORMANCE |
Bandwidth: |
20Hz to 20kHz, +0.5/-1dB |
Frequency Response: |
<10Hz to >50kHz, +0.5/-3dB
|
|
+/-15dB range |
+/-6dB range |
Dynamic Range: |
109dB |
115dB |
Signal-to-Noise: |
90dB |
97dB |
THD + Noise: |
<0.005% |
Interchannel Crosstalk: |
<-80db, 20Hz to 20kHz |
FUNCTION SWITCHES |
EQ Bypass: |
Bypasses the graphic equalizer section in the signal path |
Low Cut (recessed): |
Activates the 40Hz 18dB/octave Bessel high-pass filter |
Range (recessed): |
Selects either +/- 6dB or +/- 15dB slider boost/cut range |
INDICATORS |
Output Level Meter: |
4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu |
EQ Bypass: |
1 LED: Red |
Clip: |
1 LED: Red |
Low Cut: |
1 LED: Red |
+/-6dB: |
1 LED: Yellow |
+/-15dB: |
1 LED: Red |
POWER SUPPLY |
Operating Voltage: |
100VAC 50/60Hz, 120VAC 60Hz 230VAC 50/60Hz |
Power consumption: |
24W |
Main Connection: |
IEC receptacle |
PHYSICAL |
Dimensions: |
5.25" H X 19" W X 7.9" D (13.4cm x 48.3cm x 20.1cm) |
Weight: |
10.6 lbs. |
Shipping Weight: |
11.6 lbs. |
Note: Specifications subject to change without notice. |